FLAT WRAP RAZOR WIRE

The installation of the Flat razor wire is particularly easy.

It is supported by attaching a clip or wire to the surface in the middle or attaching the support to an existing fence post, then threading a line of support wire through the hole at the top of the support and attaching the razor wire on to it.

that flat wrap razor wire is the most under-used product for fence,

gate, and wall toppings.

Flat wraps can be used for all types of fencing, gate trims and anti-vertical climbing agents for walls and roofs. It also provides an additional deterrent for highly secure sites when secured full height and behind the fence.

Flat razor wires are designed to protect urban installations and are used where spiral razor safety barriers are not available due to their size. Razor Mesh Flat Barrier Security can be installed on all types of fences and gates. Additionally, the fence can be made of several flat strips of barbed wire.

Flat razor wire safety gates are more economical than concertina safety gates because they require much less concertina wire to make bellows fences. Therefore, flat razor barrier security is suitable if there are no special requirements for security surrounding the object.

Although slightly lower than the Concertina Razor Coil, the interference with the characteristics of the Flat razor wires is very high. The razor wire flat winding coil can retain its properties even after a barrage and light meals in various places. An important characteristic of the flat bellows fence is that it has a flat structure that does not exceed the dimensions of the fence and has a less aggressive appearance. This is suitable for creating barriers in public places.

Flat razor wires  is easy to install and does not extend beyond the boundaries of the fence. The coil height is 500mm and the approximate coil length is 12m.

Installation form

Flat spools can be used in the following formats:

Installed against existing smooth wire mesh fences.

It is attached to a welded mesh fence.

Fits by stacking fence mesh.

Mount directly to the brick wall.

advantage:

The flat coil greatly improves the efficiency of the fence. Installed on this base, the innocent are protected from injury by smooth fences while would-be intruders return and frighten themselves away.

The flat coil provides a neat and effective barrier when used with a lattice fence.

Flat coil installation is especially easy with stackable fence mesh.

Wall mounting provides a high barrier.

Flat razor wires maintenance

Minimal maintenance is required after installation. Razor wire usually remains as effective as needed. However, for the best safety, regularly check your surroundings for debris, debris, or bags trapped inside the wire to ensure the wire remains effective. Damaged wires can be repaired quickly and easily without removing the entire structure.

The thickness of the steel plate used for the flat razor wire is 0.5mm. The thin steel sheet does not affect the protective effect of the blade wire mesh, but its service life is shorter in the long term. We provide razor thorn wire center wire using high tensile galvanized steel wire (zinc amount is 40g/square). It has a long service life and is not easily damaged. The overall structure of the buckle is strong and resistant to damage.